Product Highlights
- Type: Epoxy
- Brand: Infinity Bond
- Properties: Chemical Resistant
- Application: Potting and Encapsulating, Product Assembly
- Bonds: Plastic, Metal
- Set Speed: Slow
- Mix Ratio: 1:1
- Viscosity: 12,000 cps
- Color: Black
Black Version of EP 750 Two-Part Epoxy for Casting, Potting, and Assembly
Infinity Bond EP 750 Black is a medium viscosity, two-part epoxy adhesive formulated for bonding metals, plastics, and composites in demanding environments. This black pigmented version offers the same performance as the original off-white formula, making it ideal for applications requiring color contrast or aesthetic precision. It’s widely used for structural bonding, electrical potting, encapsulation, casting, and industrial coatings—especially in bridge deck repairs, tank linings, and floor systems. Packaged in 50 ml and 400 ml cartridges with a 1:1 mix ratio, EP 750 Black provides a long 120-minute working time and strong resistance to chemicals, water, and corrosion.
Note: EP 750 is also available in an amber version for neutral or low-visibility bonding applications.
Performance Advantages of EP 750 Black Epoxy
-
Available in Two Sizes: 50 ml and 400 ml cartridges fit standard 1:1 dispensing systems.
-
Extended Working Time: 120-minute open time enables accurate part positioning and deep potting.
-
Exceptional Chemical Resistance: Withstands exposure to moisture, corrosion, and aggressive agents.
-
Pigmented Black Formula: Useful for visual inspection, contrast, or color-matched applications.
-
Versatile Use Cases: Ideal for casting, encapsulating, bonding, coatings, and industrial repair work.
- Strong Bonding Power: Bonds metals, plastics, and composites with high flexural and tensile strength.
Specifications
- Series: EP 750
- Type: Type: Two-Part Epoxy Structural Adhesive
- Color: Black
- Mix Ratio: 1:1
- Substrates: Recommended for Bonding Metal, Steel, Aluminum, and Various Plastics)
- Working Time: 120 Minutes (at 75°F / 24°C)
- Fixture Time: 4 hours (at 75°F / 24°C)
- Full Cure: 48 Hours
- Operating Temperature: -60°F to 302°F (-76°C to 150°C)
- Viscosity: 12,000 cps
- Hardness: 82 Shore D
- Flex Strength (Ultimate): 11,100 PSI
- Comp Strength (Ultimate): 17,000 PSI
- Comp Strength (Yield): 9,600 PSI
- Tensile Strength: 7,500 PSI
- Elongation: 7.5%
- Impact Resistance: >150 inch/lb
- Dielectric Strength: 440 V/mil
- VOC Content: 0% by Weight
- Flash Point: Greater than 392°F (200°C)
- Cartridge Size: 50 and 400 ml
- Shelf Life: 1 Year (unopened at room temperature)
